DTL-2 Bimetallic taura hono lug
Te pāmahana mahi: Puka tono -10 ℃ ki te 85 ℃.
Rauemi: Nylon 66,94V-2 UL.
Āhuahira: Te mura-mu (94V-2), te wera-wera, he pai te kiriweti me te kore e ngawari ki te tawhito.
Whakamahinga: Ko nga here taura kati-whaiaro he ngawari ki te whakahiato ma te ringaringa, ma te kumau ranei.
Tae: Ma, Pango, tae paerewa taiao, etahi atu tae ranei e ai ki te tono a nga kaihoko.
Ka taea e tatou te mahi OEM kia rite ki nga tauira, tuhi ranei.
| NAMA NO. | TE ROA | W (MM) | PAKAI DIAMETER E(MM) | MIN TENSILE STRENGTH | ||
| Inihi | L(mm) | LBS | KGS | |||
| LL-3×60 | 2 3/8″ | 60 | 2.5 | 2-11 | 18 | 8 |
| LL-3×80 | 3 3/16″ | 80 | 2.5 | 2-16 | 18 | 8 |
| LL-3×100 | 4” | 100 | 2.5 | 2-22 | 18 | 8 |
| LL-3×120 | 4 3/4” | 120 | 2.5 | 2-30 | 18 | 8 |
| LL-3×150 | 6” | 150 | 2.5 | 2-35 | 18 | 8 |
| LL-3×160 | 6 1/4” | 160 | 2.5 | 2-40 | 18 | 8 |
| LL-3×200 | 8” | 200 | 2.5 | 3-50 | 18 | 8 |
| LL-3×250 | 10” | 250 | 3 | 3-65 | 18 | 8 |
| LL-3×300 | 12” | 300 | 3 | 3-80 | 18 | 8 |
| LL-4×100 | 4” | 100 | 3.5 | 3-22 | 40 | 18 |
| LL-4×120 | 4 3/4” | 120 | 3.5 | 3-30 | 40 | 18 |
| LL-4×150 | 6” | 150 | 3.5 | 3-35 | 40 | 18 |
| LL-4×160 | 6 1/4” | 160 | 3.5 | 3-40 | 40 | 18 |
| LL-4×180 | 7” | 180 | 3.5 | 3-42 | 40 | 18 |
| LL-4×200 | 8” | 200 | 3.5 | 3-50 | 40 | 18 |
| LL-4×220 | 8 5/8” | 220 | 3.5 | 3-58 | 40 | 18 |
| LL-4×250 | 10” | 250 | 3.5 | 3-65 | 40 | 18 |
| LL-4×280 | 11” | 280 | 3.5 | 3-70 | 40 | 18 |
| LL-4×300 | 12” | 300 | 3.5 | 3-80 | 40 | 18 |
| LL-4×370 | 14 1/2” | 370 | 3.5 | 3-102 | 40 | 18 |
| LL-5×120 | 4 3/4” | 120 | 4.6 | 3-24 | 50 | 22 |
| LL-5×150 | 6” | 150 | 4.6 | 3-35 | 50 | 22 |
| LL-5×180 | 7” | 180 | 4.6 | 3-42 | 50 | 22 |
| LL-5×200 | 8” | 200 | 4.6 | 3-50 | 50 | 22 |
| LL-5×250 | 10” | 250 | 4.6 | 3-65 | 50 | 22 |
| LL-5×280 | 11” | 280 | 4.6 | 3-70 | 50 | 22 |
| LL-5×300 | 12” | 300 | 4.6 | 3-82 | 50 | 22 |
| LL-5×350 | 14” | 350 | 4.6 | 3-90 | 50 | 22 |
| LL-5×380 | 15” | 380 | 4.7 | 3-102 | 50 | 22 |
| LL-5×400 | 16″ | 400 | 4.7 | 3-105 | 50 | 22 |
| LL-5×450 | 18″ | 450 | 4.7 | 3-130 | 50 | 22 |
| LL-5×500 | 20” | 500 | 4.7 | 3-150 | 50 | 22 |
| LL-5×550 | 22” | 550 | 4.7 | 3-160 | 50 | 22 |
| LL-8×150 | 6” | 150 | 6.8 | 3-33 | 85 | 38 |
| LL-8×180 | 7” | 180 | 6.8 | 3-42 | 85 | 38 |
| LL-8×200 | 8” | 200 | 6.8 | 3-50 | 85 | 38 |
| LL-8×250 | 10” | 250 | 7.5 | 4-63 | 120 | 55 |
| LL-8×300 | 12” | 300 | 7.5 | 4-82 | 120 | 55 |
| LL-8×350 | 14” | 350 | 7.5 | 4-90 | 120 | 55 |
| LL-8×370 | 14 1/2” | 370 | 7.5 | 4-98 | 120 | 55 |
| LL-8×400 | 16″ | 400 | 7.5 | 4-105 | 120 | 55 |
| LL-8×450 | 18″ | 450 | 7.5 | 4-118 | 120 | 55 |
| LL-8×500 | 20” | 500 | 7.5 | 4-150 | 120 | 55 |
| LL-8×550 | 22” | 550 | 7.5 | 4-160 | 120 | 55 |
| LL-8×750 | 30″ | 750 | 7.5 | 4-220 | 120 | 55 |
Whakaahuatanga
Ko nga lugs parahi LILIAN i hangaia e te T2 parahi parakore rakau me te pai o te mahi hiko, te aukati ki te waikura galvanic, me te roa o te mahi ratonga, he pai mo te hono i te taura parahi ki etahi atu taputapu hiko, penei i te paraka tohatoha, te paraka aukati, nga panui solar, te kaainga. tono, me etahi atu, .Ka taea te whakakii i nga lugs mutunga e te waipēhi taura lugs crimper taputapu ranei hama kāhua crimper.Our lugs kāpeka ki te hanga mahi taimaha whakapai ake pāmahana teitei mauroa me te hoahoa kati hiri i roto i te makuku, whakarite hononga reliability.The mutunga ki te paerewa teitei he maamaa ake te whakatuwheratanga mo te whakauru waea.
Rauemi
Ko nga taura taura parahi he mea hanga ki te 99.9% te rakau parahi parakore me te paninga tine hei tiaki i te waikura.
Te pāmahana mahi: -55°C ~ 150°C.
Momo lugs taura: parahi taura lug, parahi tine taura lug, konumohe taura lug, bimetallic lugs, hononga miihini me nga lugs.
c
| NAMA NO. | Ahu(mm) | |||||
| Φd2 | B | L | ΦD | Φd | E | |
| 8#10 | 5.1 | 11.8 | 33.3 | 7.1 | 4.8 | 13 |
| 8*1/4 | 6.8 | 11.8 | 33.3 | |||
| 8*5/16 | 8.3 | 11.8 | 33.3 | |||
| 8*3/8 | 10.4 | 14.5 | 33.3 | |||
| 8*1/2 | 13.1 | 17 | 33.3 | |||
| 6#10 | 5.1 | 11.8 | 37.3 | 8.1 | 5.9 | 15 |
| 6*1/4 | 6.8 | 13.7 | 37.3 | |||
| 6*5/16 | 8.3 | 13.7 | 37.3 | |||
| 6*3/8 | 10.4 | 13.7 | 37.3 | |||
| 6*1/2 | 13.1 | 17 | 37.3 | |||
| 4*1/4 | 6.8 | 13.8 | 38.9 | 9.5 | 7.3 | 15.5 |
| 4*5/16 | 8.3 | 13.8 | 38.9 | |||
| 4*3/8 | 10.4 | 14.5 | 38.9 | |||
| 4*1/2 | 13.1 | 17 | 38.9 | 15 | ||
| 2*1/4 | 6.8 | 16.5 | 41.1 | 11.1 | 8.5 | 16 |
| 2*5/16 | 8.3 | 16.5 | 41.1 | |||
| 2*3/8 | 10.4 | 16.5 | 41.1 | |||
| 2*1/2 | 13.1 | 17 | 41.1 | 15.3 | ||
| 1*1/4 | 6.8 | 16.4 | 43.6 | 11.7 | 9.1 | 16 |
| 1*5/16 | 8.3 | 16.4 | 43.6 | |||
| 1*3/8 | 10.4 | 17.1 | 43.6 | |||
| 1*1/2 | 13.1 | 19.1 | 43.6 | |||
| 1/0*1/4 | 6.8 | 18.4 | 46.8 | 13 | 10.4 | 19 |
| 1/0*5/16 | 8.3 | 18.4 | 46.8 | |||
| 1/0*3/8 | 10.4 | 18.4 | 46.8 | |||
| 1/0*1/2 | 13.1 | 21 | 46.8 | |||
| 2/0*1/4 | 6.8 | 21 | 52.4 | 14.2 | 11.7 | 22 |
| 2/0*5/16 | 8.3 | 21 | 52.4 | |||
| 2/0*3/8 | 10.4 | 21 | 52.4 | |||
| 2/0*1/2 | 13.1 | 21 | 52.4 | 21 | ||
| 3/0*5/16 | 8.3 | 23.1 | 55.9 | 15.7 | 13 | 22.5 |
| 3/0 | 10.4 | 23.1 | 55.9 | |||
| 3/0*1/2 | 13.1 | 23.1 | 55.9 | |||
| 4/0*5/16 | 8.3 | 25.8 | 60.5 | 17.2 | 14.2 | 24 |
| 4/0*3/8 | 10.4 | 25.8 | 60.5 | |||
| 4/0*1/2 | 13.1 | 25.8 | 60.5 | |||
Te Whakatupato i te Whakatupato
1.Me whakakorikori te tīwiri.
2.Ko te taura me te putea parahi me whakauru ki te waahi ka pehia ki nga taputapu crimping.
FAQ
1.Q: ka taea e au te whakatakoto i taku ake tohu ki runga?
A: Ae, ka taea te taia te waitohu a nga kaihoko ki runga ranei i nga taonga.
2.Q: Me pehea nga tiwhikete?
A: ISO9001, CE, ROHS, TUL.UL
3.He aha to tikanga mo te tarapi?
A: Ko te tikanga, ka kohia e matou a matou taonga ki roto i nga pouaka maamaa me nga kaata parauri.Mena kua rehitatia e koe te patent,
ka taea e matou te kiki i nga taonga ki roto i o pouaka waitohu i muri i te whiwhinga o o reta whakamana.
4. He aha to tikanga utu?
A: T / T 30% hei putea, me te 70% i mua i te tuku.Ka whakaatuhia e matou nga whakaahua o nga hua me nga kete
i mua i to utu i te toenga.
